Shrink wrap combo systems use an L Bar sealing cutting machine and heat shrink tunnel to shrink package products in one continuous line. The combination of both machines streamlines the shrink wrapping process. Small or single-piece wrapping usually means long hours, lots of wasted material and less-than-efficient throughput. But, with the E-Pack automatic heat shrink wrap machine, you’ll forget the days of manual bagging or hand wrapping by introducing a system that automatically wrapping of each piece faster and with less material than ever before.
Automatic L bar sealing and cutting machine detect products as they pass through the conveyor. After a product passes the sealing arm, the seals fully enclose the product in shrink film. After the seal, products continue down a conveyor into the heat shrink tunnel. The heat shrink tunnel has recirculating heat to shrink the film to the product evenly. Fully wrapped products exit the tunnel, and the film is conformed tightly to the product.
Frequently asked questions about shrink wrap system ?
How large is the machine footprint?
The combo systems are in-inline machines, they are longer and take up some space. Standard devices can be 3050mm long, 2210mm wide. Standard machines weight: 380KG.
How many products can be shrunk per minute by the shrink wrap machines？
The shrink capability will depend on the products size, normally 20-40bags per minute.
E-pack Technology Co.,Ltd.
Address : Huiyuan Building 1808, No.318 Zhonglinli, Haicang district, Xiamen, CN, 361026
Tel : +86 19959284556
Email : info@easypacktech.com
